Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 5.6 cm x 3.4 cm height
- Outside diameter: 7.1 cm x 4.1 cm height
- Dimensions of the lid from the mold: 5.9 cm diameter x 1.9 cm height
- Container + Lid dimensions: 7.1 cm diameter x 6 cm height
- Container weight: ~100 g average value (based on stone powder casting)
- Lid weight: 25 g
- Container + Lid weight: 125 g
- Mold container weight: 160 g silicone
- Mold lid weight: 50 g silicone
- Total mold + lid weight: 210 g
- Liquid capacity of the container: 75 g
- You can produce 1 circular form container with lid per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness that does not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast approximately 500 objects.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting advantages. Except for stone powder casting, they are compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the drying and working conditions of the raw material, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only a high-quality silicone mold that allows you to produce the container will be sent with your order. The package consists of 4 parts: 1 silicone mold, 1 silicone lid, and 2 clamps.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label containing weight and size information to help you calculate raw material usage easily. This label prevents raw material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Stone Powder Mixture Ratio Tip: The reference mixture ratio is 310-350 g water per 1 kg stone powder. Correctly adjusting the stone powder and water ratio will make the resulting object stronger and more durable. Increasing water ratio increases fragility; decreasing it makes pouring and spreading the mixture in the mold harder. Also, adjust these ratios seasonally according to ambient temperature changes.
- Air Bubble Warning: Adding the appropriate amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. The reference ratio is 1-3 g Li-Quit Air Entrainer per 100 g mixture. Additionally, lightly tapping the mold after casting helps air bubbles rise to the surface.
- Demolding Time: To ensure smooth details, do not remove the object from the mold before the stone powder cures and the heating phase ends.
- Mold Release Spray Use: For serial production, you can use mold release spray to extend mold life and release objects faster. Apply the spray evenly on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, every casting is an enjoyable experience. We wish you a joyful and patient production process.
