Bathroom Organizer Three-Compartment Silicone Mold

PRODUCT DIMENSIONS

• Object sizes from mold:
• Circular inner: 3.2 cm diameter x 5 cm depth - 2 pieces
• Rectangular inner: 3.5 cm width x 6 cm length x 5 cm depth
• Outer dimensions: 13 cm width x 7.5 cm length x 6 cm height
• Object weight: ~700 g average, based on stone powder casting
• Mold weight: 660 g silicone
• Frame weight: 85 g
• Mold + Frame weight: 745 g
• One casting produces one bathroom organizer container.

GENERAL PRODUCT INFORMATION

• Optimal Hardness: Molds are made of durable white silicone with optimal hardness to avoid damage to object details. Flexible with smooth inner surfaces.
• Casting Guarantee: Approximately 500 castings possible if storage and usage conditions are followed.
• Supportive PLA Frame Attachment: The outer frame is made of PLA, an organic bioplastic, to perfectly maintain form during casting. Frame color may vary by stock.
• Multi-Purpose Casting Advantage: Silicone molds are suitable for various castings except stone powder; compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster. Not recommended for food products.
• Package Contents: Containers shown are not included. Only the high-quality silicone mold for container production is sent. Package includes 5 parts: 1 silicone mold, 2 PLA frames, and 2 clamps.
• Special Kraft Box and Information Label: Product shipped in a kraft box with label showing weight and dimension info to help calculate raw material and reduce waste.

USAGE INSTRUCTIONS

• First Use: Clean molds with soapy water and dry thoroughly before use.
• PLA Frame Use: Insert frame into silicone mold and secure with clamps before casting to prevent deformation. Do not apply direct heat to frame.
• Wick Placement: Molds are sent without wick holes. Create wick hole easily with a tool or medium-thick needle before wax casting.
• Level Surface: Ensure mold is placed on a flat, level surface before casting for perfect form.
• Stone Powder Mixing Ratio Tip: Reference ratio is 310-350 g water per 1 kg powder. Adjust water for strength and workability; temperature changes may require ratio adjustments.
• Air Bubble Warning: Add 1-3 g Li-Quit air entrainer per 100 g mix to reduce bubbles. Light tapping after casting helps bubbles rise.
• Demolding Time: Remove from mold after curing is complete to preserve smooth details.
• Mold Release Spray Use: Use release spray evenly inside mold to extend life and ease demolding in serial production.

CLEANING AND STORAGE INSTRUCTIONS

• Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
• Proper Storage: Store dry molds in original kraft box away from direct sunlight, heat, and pressure to avoid deformation.
• Quick Cleaning: Use wet wipes, tape, or alcohol wipes as needed.

Remember, each casting is a rewarding experience. We wish you patience and enjoyment in your production process.