Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 10 cm x 4 cm height
- Outside diameter: 12 cm x 5 cm height
- Dimensions of the lid from the mold: 10 cm diameter x 1 cm thickness
- Container weight: ~380 g average value, based on stone powder casting
- Lid weight: 190 g
- Container + Lid weight: 570 g
- Mold container weight: 365 g silicone
- Mold lid weight: 150 g silicone
- Hoop weight: 60 g
- Total weight of mold + lid + hoop: 575 g
- Liquid capacity of the container: 290 g
- You can produce 1 circular form container with lid per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made from durable white silicone with optimal hardness that will not damage object details. They are flexible with smooth inner surfaces.
- Casting Guarantee: When stored and used properly, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic material, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for multiple casting materials except stone powder; compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster. Pay attention to drying and working conditions of your raw material. Not recommended for food products.
- Package Contents: The containers shown in images are not included in the sale. Only a high-quality silicone mold for producing containers will be sent with your order. The package contains 6 pieces: 1 silicone mold, 1 silicone lid, 2 PLA hoop parts, and 2 clamps.
- Special Kraft Box and Information Label: Your product is shipped in a special kraft box with a label containing weight and dimension information to help you calculate raw material usage easily. This prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Using the PLA Hoop: Before casting, place the hoop around the silicone mold and secure it with clamps. This prevents the silicone from stretching and deforming during casting. Important warning: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop. High heat may deform or melt the PLA material.
- Level the Surface: Ensure the surface where you place the mold is flat and level for a perfect form.
- Stone Powder Mixture Ratio Tip: Reference mixture ratio is 310-350 g water per 1 kg stone powder. Correct water-to-powder ratio ensures stronger, more durable objects. Higher water increases fragility; lower water makes pouring and spreading harder. Adjust ratios seasonally with temperature changes.
- Air Bubble Warning: Adding the recommended amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. Reference ratio: 1-3 g Li-Quit per 100 g mortar. Lightly tapping the mold after pouring helps bubbles rise to the surface.
- Demolding Time: To achieve smooth details, do not remove the object from the mold before the stone powder fully cures and heat phase ends.
- Using Mold Release Spray: For serial production, use mold release spray to extend mold life and ease object removal. Apply an even layer on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Store molds completely dry in their original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, each casting is a joyful experience. We wish you patience and pleasure in your production process.
