Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 8 cm x 6 cm height
- Outside diameter: 10 cm x 8 cm height
- Container weight: ~615 g average value, based on stone powder casting
- Mold container weight: 460 g silicone
- Hoop weight: 80 g
- Total mold + hoop weight: 540 g
- Liquid capacity of the container: 250 g
- You can obtain 1 patterned circular container per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made of durable white silicone with optimal hardness that does not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic material, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-Purpose Casting Advantage: Silicone molds are inherently versatile. Except for stone powder casting, they are compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to drying and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in images are not included in the sale. Only a high-quality silicone mold to produce containers will be sent with your order. The package includes 5 pieces: 1 silicone mold, 2 PLA hoop parts, and 2 clamps.
- Special Kraft Box and Information Label: Your product is shipped in a special kraft box with a label containing weight and dimension information to help you calculate raw material usage easily. This prevents waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- PLA Hoop Usage: Before casting, place the hoop onto the silicone mold and secure with clamps. This prevents the silicone from stretching and deforming during casting. Important warning: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop as high heat may deform or melt the PLA material.
- Level the Surface: Ensure the surface where you place the mold before casting is flat and level for a perfect form.
- Stone Powder Mixture Ratio Tip: Reference mixture ratio is 310-350 g water per 1 kg stone powder. Correct water ratio ensures a stronger, more durable object. Higher water increases brittleness; lower water makes pouring and spreading harder. Adjust ratios seasonally with temperature changes.
- Air Bubble Warning: Adding the recommended amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. Reference ratio is 1-3 g Li-Quit per 100 g mortar. Lightly tapping the mold after pouring helps bubbles rise to the surface.
- Demolding Time: To preserve smooth details, do not remove the object from the mold before the stone powder fully cures and heat phase ends.
- Mold Release Spray Usage: For serial production, use mold release spray to extend mold life and speed up demolding. Apply an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Store completely dry molds in their original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, each casting is an enjoyable experience. We wish you patience and pleasure in your production process.
