Product Info
PRODUCT DIMENSIONS
- Object dimensions from inside the mold:
- Calvin 1
- Inside dimensions: 7.5 cm width x 20.5 cm length x 3.4 cm height
- Outside dimensions: 8.5 cm width x 21.5 cm length x 4 cm height
- Calvin 2
- Inside dimensions: 11 cm width x 28.2 cm length x 3 cm height
- Outside dimensions: 12 cm width x 29 cm length x 4 cm height
- Container weight: ~1020 g average total value, based on stone powder casting.
- Calvin-1: 325 g
- Calvin-2: 695 g
- Mold weight: 1335 g total silicone weight.
- Calvin-1: 475 g
- Calvin-2: 860 g
- Liquid capacity of the container: 730 g total.
- Calvin-1: 280 g
- Calvin-2: 450 g
- This set includes 2 boat-shaped container molds.
- You can produce 2 boat containers from 2 molds in one casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made of durable white silicone with optimal hardness that will not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: With proper storage and usage, you can cast approximately 500 objects.
- Multi-Purpose Casting Advantage: Due to their silicone composition, these molds are suitable for multiple casting materials except stone powder; compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster. By paying attention to drying and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only the high-quality silicone molds for container production will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing weight and dimension information to help you calculate raw material usage easily. This label prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, wick holes are sent unopened and uncut. Before wax casting, you can easily pierce the wick hole in seconds without damaging the mold using a tool called "biz" or a medium-thickness quilting needle.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Stone Powder Mixing Ratio Tip: The reference mixing ratio is 310-350 g water per 1 kg powder. Correctly adjusting the stone powder and water ratio makes the final object stronger and more durable. Increasing water ratio increases fragility; decreasing it makes pouring and spreading the mixture in the mold harder. Also, adjust these ratios seasonally as ambient temperature changes.
- Air Bubble Warning: Adding the appropriate amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. Reference ratio is 1-3 g Li-Quit per 100 g mortar. Also, lightly tapping the mold after casting helps bubbles rise to the surface.
- Demolding Time: To preserve smooth details, do not remove the object from the mold before the stone powder fully cures and the heating phase ends.
- Mold Release Spray Usage: For serial production, use mold release spray to extend mold life and speed up demolding. Apply an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Ensure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, every casting is a joyful experience. We wish you patience and pleasure in your production process.
