Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 13.4 cm x 12 cm height
- Outside diameter: 15 cm x 13 cm height
- Container weight: ~900 g average value. Based on stone powder casting.
- Mold weight: 930 g silicone
- Hoop weight: 110 g
- Total mold + hoop weight: 1040 g
- Liquid capacity of the container: 1400 g
- You can obtain 1 circular-shaped container per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made from durable white silicone with optimal hardness that will not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic material, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting advantages. Except for stone powder casting; they are compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to drying and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce containers will be sent with your order. The package consists of 5 parts: 1 silicone mold, 2 PLA hoop pieces, and 2 clamps.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label containing weight and dimension information to help you calculate raw material usage easily. This label prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- PLA Hoop Usage: Before casting, place the hoop onto the silicone mold and secure with clamps. This prevents the silicone from stretching and deforming during casting. Important warning: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop. High heat may deform or melt the PLA material.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Stone Powder Mixture Ratio Tip: The reference mixture ratio is 310-350 g water per 1 kg stone powder. Correctly adjusting the stone powder and water ratio makes the resulting object stronger and more durable. Increasing water ratio increases brittleness; decreasing it makes pouring and spreading the mixture in the mold harder. Also, adjust ratios seasonally as ambient temperature varies.
- Air Bubble Warning: Adding the appropriate amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. Reference ratio is 1-3 g Li-Quit per 100 g mortar. Additionally, lightly tapping the mold after pouring creates vibrations that help air bubbles rise to the surface.
- Demolding Time: To ensure smooth details, do not remove the object from the mold before the stone powder fully cures and the heating phase ends.
- Mold Release Spray Usage: For serial production, you can use mold release spray to extend mold life and speed up demolding. Apply the spray evenly inside the mold to form a uniform layer.
CLEANING AND STORAGE INSTRUCTIONS
- Post-use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, each casting is an enjoyable experience. We wish you patience and pleasure in your production process.
