Product Info
PRODUCT DIMENSIONS
- Dimensions of the container from the mold:
- Inside diameter: 10.5 cm x 4.5 cm height
- Outside diameter: 12.5 cm x 5.4 cm height
- Dimensions of the lid from the mold: 12.5 cm diameter x 1.5 cm thickness
- Total container + lid dimensions: 12.5 cm diameter x 1.5 cm thickness
- Container weight: ~355 g (average value, based on stone powder casting)
- Lid weight: 190 g
- Container + lid weight: 545 g
- Mold container weight: 380 g silicone
- Mold lid weight: 145 g silicone
- Hoop weight: 60 g
- Total weight of mold + lid + hoop: 593 g
- Liquid capacity of the container: 350 g
- You can produce one circular form container with lid per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that will not damage object details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: When stored and used properly, you can cast approximately 500 objects.
- Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic material, to perfectly maintain the form during casting. Hoop color may vary depending on stock.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds are suitable for multiple casting materials except stone powder. Compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. Please pay attention to drying and working conditions of your casting material. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only a high-quality silicone mold that allows you to produce the container will be sent with your order. The package includes 6 pieces: 1 silicone mold, 1 silicone lid, 2 PLA hoops, and 2 clamps.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing weight and dimension information to help you calculate raw material usage easily. This prevents material waste and saves you from searching for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Using the PLA Hoop: Before casting, place the hoop around the silicone mold and secure it with clamps. This prevents the silicone from stretching and deforming during casting. Important warning: Do not apply direct heat (hair dryer, heat gun, etc.) to the hoop. High heat may deform or melt the PLA material.
- Level the Surface: Ensure the surface where you place the mold is flat and level to achieve a perfect form.
- Stone Powder Mixture Ratio Tip: The reference mixing ratio is 310-350 g water per 1 kg stone powder. Correct water-to-powder ratio ensures a stronger and more durable object. Increasing water ratio increases fragility; decreasing it makes pouring and spreading the mixture harder. Adjust ratios seasonally according to ambient temperature changes.
- Air Bubble Warning: Adding the recommended amount of Li-Quit Air Entrainer after mixing stone powder with water minimizes air bubbles. Reference ratio is 1-3 g Li-Quit per 100 g mixture. Also, gently tapping the mold after pouring helps bubbles rise to the surface.
- Demolding Time: To preserve mold details, do not remove the object from the mold before the stone powder fully cures and the heating phase ends.
- Using Mold Release Spray: For serial productions, use mold release spray to extend mold life and speed up demolding. Apply an even layer on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Ensure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, every casting is a delightful experience. We wish you patience and joy in your production process.
