Product Info
PRODUCT DIMENSIONS
- Object dimensions from the mold:
- Inside diameter: 6.9 cm x 3.2 cm height
- Outside diameter: 7.9 cm x 3.8 cm height
- Container weight: ~90 g average value, based on stone powder casting
- Mold weight: 180 g silicone
- Liquid capacity of the container: 100 g
- You can obtain 1 ribbed circular surface container per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: Molds are made from durable white silicone with optimal hardness that does not damage object details. They are flexible with smooth inner surfaces.
- Casting Guarantee: When stored and used properly, you can cast approximately 500 objects.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting benefits. Except for stone powder casting, they are compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the drying and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The containers shown in the images are not included in the sale. Only the high-quality silicone mold to produce the container will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and dimension information to help you calculate raw material usage easily. This label prevents material waste and eliminates the need to search for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry thoroughly before use.
- Wick Placement: Since molds have multi-purpose casting advantages, they are sent without wick holes being cut or drilled. Before casting wax, you can easily pierce the point where the wick will pass using a tool called a "biz" or a medium-thickness quilting needle within seconds without damaging the mold.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Stone Powder Mixing Ratio Tip: The reference mixing ratio is 310-350 g of water per 1 kg of stone powder. Correctly adjusting the stone powder and water ratio makes the resulting object stronger and more durable. Increasing water ratio increases fragility; decreasing it makes pouring and spreading the mixture in the mold harder. Also, adjust these ratios seasonally as ambient temperature varies.
- Air Bubble Warning: After mixing stone powder with water, adding the required amount of Li-Quit Air Entrainer minimizes air bubble formation. The reference ratio is 1-3 g Li-Quit Air Entrainer per 100 g mortar. Additionally, lightly tapping the mold after casting creates vibrations that help air bubbles rise to the surface.
- Demolding Time: To ensure smooth details, do not remove the object from the mold before the stone powder cures and the heating phase ends.
- Mold Release Spray Usage: For serial production, you can use mold release spray to extend mold life and remove objects quickly. When applying, ensure an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: Wash with soapy water after casting and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for quick cleaning.
Remember, every casting is an enjoyable experience. We wish you patience and pleasure in your production process.
