Byzantine Column Silicone Base Mold

PRODUCT DIMENSIONS

• Base dimensions from mold:
• Inner diameter: 2.5 cm x 10.4 cm height
• Outer diameter: 5.5 cm x 11 cm height
• Base weight: approx. 160 g average. Reference is stone powder casting.
• Mold weight: 350 g silicone
• One circular surface candle holder base with column appearance can be obtained per casting.

GENERAL PRODUCT INFORMATION

• Optimal Hardness: Molds are made of durable white silicone with optimal hardness that does not damage object details. Flexible with smooth inner surfaces.
• Casting Guarantee: Approximately 500 castings can be made if storage and usage conditions are followed.
• Multi-Purpose Casting Advantage: Silicone molds are suitable for various castings except stone powder; compatible with wax, soap, concrete, epoxy, scented stone, ceramic, and plaster. Pay attention to drying and working conditions of materials. Not recommended for food products.
• Package Contents: The base and candle shown in images are not included. Only the high-quality silicone mold for base production will be sent.
• Special Kraft Box and Information Label: The product is shipped in a labeled kraft box with gram and size info to help calculate raw materials and reduce waste without digital lookup.

USAGE INSTRUCTIONS

• First Use: Clean molds with soapy water and dry thoroughly before use.
• Wick Placement: Molds are sent without wick holes opened or cut. Before casting wax, create the wick hole easily without damaging the mold using a tool called “biz” or a medium-thickness quilting needle.
• Level the Surface: Ensure the surface where the mold is placed is flat and level before casting for perfect form.
• Stone Powder Mixing Ratio Tip: Reference ratio is 310-350 g water per 1 kg powder. Correct ratio ensures stronger objects. Higher water increases fragility; lower water makes pouring and spreading harder. Adjust ratios seasonally with temperature changes.
• Air Bubble Warning: Adding Li-Quit Air Entrainer (1-3 g per 100 g mix) minimizes bubbles. Light tapping after casting helps bubbles rise.
• Demolding Time: Remove from mold after stone powder cures and heating phase ends to preserve smooth details.
• Mold Release Spray Use: For series production, use mold release spray evenly inside mold to extend life and ease demolding.

CLEANING AND STORAGE INSTRUCTIONS

• Post-Use Cleaning: Wash with soapy water and dry thoroughly after casting.
• Proper Storage: Silicone is flexible and may deform under pressure. Store dry molds in original kraft box away from direct sunlight, high heat, and weight.
• Quick Cleaning: Use wet wipes, tape, or alcohol wipes as needed.

Remember, each casting is an enjoyable experience. We wish you patience and pleasure in your production process.