Cotton Wick Sabitleme Aparati and 3 pcs Sabitleyici

This product is used to center and secure 1 to 5 cotton wicks in a container with a diameter of 10 cm. Made from PLA material, it has a cylindrical shape with a diameter of 10 cm, fitting perfectly into a circular container with a 10 cm opening diameter. Inside the cylinder, there are five small cylindrical holes with a diameter of 1.4 cm. The securing devices fit into these holes to fix your wick firmly to the container. The dimensions of the wick holders are: 12 mm top diameter, 16 mm bottom diameter, and 120 mm height. Insert your wick into the channel on the holder. To press the wick holder against the bottom surface, pull the wick and press the holder onto the 16 mm diameter surface. Choose the appropriate small hole inside the cylinder and insert the holder into it. Remove the tape on the wick holder. Repeat this process for the number of wicks you want to place. Then, place the securing apparatus into your circular container. Push the holder down until it reaches the bottom surface of the container and stick it firmly. When you lift the securing apparatus, your wick will be attached to the container. Finally, fix your wick at the top surface of your container. Your container will be ready for candle pouring. To avoid deformation, do not expose the product to high heat. This product is suitable for cotton wicks only and not for wooden wicks. The product includes one circular securing apparatus and three holders, totaling four pieces. The container and wicks shown in the images are not included in the sale.