Product Info
PRODUCT DIMENSIONS
- Candle dimensions from the mold: 6.7 cm width x 7.6 cm length x 8.2 cm height
- Average candle weight: ~165 g
- Mold weight: 170 g
- You can create one small 3D Santa Claus shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible and have smooth inner surfaces.
- Casting Guarantee: If storage and usage conditions are followed, you can cast candles approximately 500 times.
- Multi-Purpose Casting Advantage: Due to their structure, silicone molds offer multi-purpose casting benefits. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By paying attention to the freezing and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be sent in a special kraft box with a label containing gram and size information to help you calculate raw material usage easily. This label prevents material waste and eliminates the need to search for this data digitally each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or pierced. Before candle casting, you can easily pierce the point where you will pass the wick using a tool called a "biz" or a medium-thickness quilting needle in seconds without damaging the mold.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Temperature Balance: To get smooth details, pay attention to the melting temperature and casting temperature of the wax. Trying to remove the candle from the mold before it is completely cooled and solidified may cause loss of details and shape distortions.
- Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer for your subsequent castings. To reduce workload and avoid risk, it is recommended to have separate molds for colored and white castings.
- Use of Mold Release Spray: For serial productions, you can use mold release spray to extend the mold's lifespan and to release the object quickly from the mold. When applying the spray, ensure an even layer on the mold's inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off candle residues with a paper towel. Then wash with soapy water and dry thoroughly.
- Perfect Storage: Since silicone is flexible, it may deform over time under pressure. Make sure your mold is completely dry and store it in its original kraft box. Keep it away from direct sunlight, high heat, and places where weight will be applied.
- Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle casting is an enjoyable experience in itself. We wish you a joyful and patient production process.
