2D Snow Globe Kardan Adam Patterned Silicone Candle Mold

PRODUCT DIMENSIONS

• Candle dimensions from the mold: 9.4 cm width x 10 cm length x 3 cm height
• Average candle weight: ~185 g
• Mold weight: 170 g
• You can create one snow globe-shaped candle with a snowman design per casting.

GENERAL PRODUCT INFORMATION

• Optimal Hardness: The molds are made from durable white silicone with optimal hardness to prevent damage to candle details. They are flexible with smooth inner surfaces.
• Casting Guarantee: With proper storage and usage, you can cast candles approximately 500 times.
• Multi-Purpose Casting Advantage: Due to their composition, silicone molds are suitable for multiple casting purposes. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stones, ceramics, and plaster castings. Please pay attention to the freezing and working conditions of your casting material. Not recommended for food products.
• Package Contents: The candles and stone powder castings shown in the images are not included. Only the high-quality silicone mold to create these objects will be sent with your order.
• Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and dimension information to help you calculate raw material usage easily. This label helps prevent material waste and avoids the need to search for digital data each time.

USAGE INSTRUCTIONS

• First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
• Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or pierced. Before candle casting, you can easily pierce the wick hole at the desired point using a tool called “biz” or a medium-thickness quilting needle within seconds without damaging the mold.
• Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
• Temperature Balance: To get smooth details, pay attention to the melting and casting temperature of the wax. Trying to remove the candle from the mold before it is completely cooled and solidified may cause loss of details and shape distortions.
• Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer for subsequent castings. To reduce workload and risk, we recommend having separate molds for colored and white castings.
• Use of Mold Release Spray: For serial productions, you can use mold release spray to extend mold life and release objects faster. When applying, ensure an even layer on the mold’s inner surfaces.

CLEANING AND STORAGE INSTRUCTIONS

• Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off wax residues with paper towels. Then wash with soapy water and dry thoroughly.
• Perfect Storage: Silicone is flexible and may deform under pressure over time. Make sure your mold is completely dry and store it in its original kraft box. Keep it away from direct sunlight, high heat, and heavy weights.
• Quick Cleaning: You can use wet wipes, adhesive tape, or cologne wipes for instant cleaning.

Remember, every candle casting is an enjoyable experience. We wish you patience and pleasure throughout your production process.