Candelabra Rose Silicone Candle Mold

PRODUCT DIMENSIONS:

• Candle dimensions from mold: 2.5 cm width x 2.2 cm depth x 24 cm height
• Average candle weight: ~60 g
• Mold weight: 300 g
• Hoop weight: 90 g
• Total mold + hoop weight: 390 g
• One rose-decorated candelabra candle can be produced per casting.

GENERAL PRODUCT INFORMATION:

• Optimal Hardness: Molds are made from durable white silicone with optimal hardness to protect candle details. Flexible with smooth inner surfaces.
• Casting Guarantee: Approximately 500 castings possible if storage and usage conditions are followed.
• Supportive PLA Hoop Attachment: The outer hoop is made from PLA, an organic bioplastic, to maintain form during casting. Hoop color may vary by stock.
• Multi-Purpose Casting Advantage: Silicone molds are suitable for casting soap, concrete, epoxy, scented stones, ceramics, and plaster besides candles. Not recommended for food products.
• Package Contents: The candle and stone powder shown in images are not included. Package contains 7 parts: 1 silicone mold, 2 PLA hoop pieces, and 4 clips.
• Special Kraft Box and Information Label: Delivered in a kraft box with a label showing weight and size info to help avoid material waste.

USAGE INSTRUCTIONS:

• First Use: Clean molds with soapy water and dry thoroughly before use.
• Wick Placement: Molds are sent without wick holes. Use a tool or medium-thick needle to create wick holes before casting.
• PLA Hoop Use: Attach hoop to mold and secure with clips before casting to prevent deformation. Do not apply direct heat to hoop.
• Level Surface: Ensure mold is placed on a flat, level surface before casting.
• Temperature Balance: Pay attention to melting and casting temperatures for smooth details. Remove candle only after fully cooled.
• Colored Casting Tip: Colored wax may stain mold. Use separate molds for colored and white castings to avoid color transfer.
• Mold Release Spray: Use to extend mold life and ease object removal during serial production.

CLEANING AND STORAGE INSTRUCTIONS:

• Post-Use Cleaning: Warm air gun lightly heats mold interior to remove wax residues with paper towel, then wash with soapy water and dry.
• Proper Storage: Store dry molds in original kraft box away from sunlight, heat, and pressure to prevent deformation.
• Quick Cleaning: Use wet wipes, tape, or alcohol wipes as needed.

Remember, each candle casting is a rewarding experience. We wish you patience and enjoyment in your production process.