Product Info
PRODUCT DIMENSIONS
- Candle size from the mold: 4 cm diameter x 2.5 cm height
- Average candle weight: ~10 g
- Mold weight: 40 g
- You can create 1 agavoides succulent-shaped candle per casting.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness that does not damage candle details. They are flexible with smooth inner surfaces.
- Casting Guarantee: When stored and used properly, you can cast approximately 500 candles with this mold.
- Multi-Purpose Casting Advantage: Due to their design, silicone molds offer multi-purpose casting benefits. Besides candle casting, they are compatible with soap, concrete, epoxy, scented stone, ceramic, and plaster castings. By considering the freezing and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be shipped in a special kraft box with a label containing gram and size information to help you calculate raw material amounts easily. This label prevents material waste and saves you from searching for data digitally every time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or drilled. Before candle casting, you can easily pierce the point where you will insert the wick using a tool called "biz" or a medium-thickness quilting needle within seconds without damaging the mold.
- Level the Surface: To achieve a perfect form, ensure the surface where you place the mold before casting is flat and level.
- Temperature Balance: Pay attention to the melting temperature and casting temperature of the wax to ensure smooth mold details. Trying to remove the candle before it is fully cooled and solidified may cause loss of detail and shape differences.
- Colored Casting Tip: If your wax mixture is colored, the silicone mold may change color after casting. Following cleaning and storage instructions will minimize color transfer for future castings. To reduce workload and risk, it is recommended to have separate molds for colored and white castings.
- Use of Mold Release Spray: For serial productions, you can use mold release spray to extend mold life and quickly release objects from the mold. When applying, ensure an even layer on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off wax residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You can use wet wipes, adhesive tape, or alcohol wipes for quick cleaning.
Remember, every candle casting is an enjoyable experience. We wish you patience and pleasure in your production process.
