Product Info
PRODUCT DIMENSIONS
- Candle dimensions from the mold: 7.5 cm diameter x 4.5 cm height
- Average candle weight: ~140 g
- Mold weight: 150 g
- You can create one medium-sized munchkin pumpkin-shaped candle per pour.
GENERAL PRODUCT INFORMATION
- Optimal Hardness: The molds are made from durable white silicone with optimal hardness to prevent damage to candle details. They are flexible with smooth inner surfaces.
- Pouring Guarantee: When stored and used properly, you can pour approximately 500 candles with this mold.
- Multi-Purpose Pouring Advantage: Due to their design, silicone molds are suitable for multiple casting uses. Besides candle pouring, they are compatible with soap, concrete, epoxy, scented stones, ceramics, and plaster castings. By paying attention to the freezing and working conditions of your raw materials, you can create many different products. Not recommended for food products.
- Package Contents: The candles and stone powder castings shown in the images are not included in the sale. Only the high-quality silicone mold that allows you to produce these objects will be sent with your order.
- Special Kraft Box and Information Label: Your product will be delivered in a special kraft box with a label containing gram and size information to help you calculate raw material amounts easily. This label helps prevent material waste and saves you from searching for digital data each time.
USAGE INSTRUCTIONS
- First Use: It is recommended to clean your molds with soapy water and dry them thoroughly before use.
- Wick Placement: Since the molds have multi-purpose casting advantages, they are sent without wick holes being cut or pierced. Before candle pouring, you can easily pierce the wick hole in seconds without damaging the mold using a tool called a "biz" or a medium-thickness quilting needle.
- Level the Surface: To achieve a flawless form, ensure the surface where you place the mold before pouring is flat and level.
- Temperature Balance: To preserve the mold’s details smoothly, pay attention to the candle’s melting and pouring temperatures. Trying to remove the candle from the mold before it is fully cooled and solidified may cause loss of details and shape distortions.
- Colored Pouring Tip: If your candle mixture is colored, the silicone mold may change color after pouring. Following cleaning and storage instructions will minimize color transfer for your subsequent pours. To reduce workload and risk, it is recommended to have separate molds for colored and white pours.
- Use of Mold Release Spray: For serial production, you can use mold release spray to extend mold life and release objects quickly. When applying, ensure an even layer on the mold’s inner surfaces.
CLEANING AND STORAGE INSTRUCTIONS
- Post-Use Cleaning: After casting, gently heat the inside of the mold with a hot air gun and wipe off candle residues with paper towels. Then wash with soapy water and dry thoroughly.
- Proper Storage: Silicone is flexible and may deform under pressure over time. Make sure the mold is completely dry and store it in its original kraft box. Keep it away from direct sunlight, high heat, and heavy weights.
- Quick Cleaning: You may use wet wipes, adhesive tape, or cologne wipes for instant cleaning.
Remember, every candle pouring is an enjoyable experience. We wish you a joyful and patient production process.
